
Winter Haven Cabinet Refacing
Cabinet Refacing in Winter Haven, FL
Cabinet Refacing in Winter Haven, FL. New doors, veneer, and hardware over existing boxes. Free estimates, humidity-rated materials.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Winter Haven and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Cabinet refinishing services Winter Haven homeowners trust
Winter Haven Cabinet Refacing works on the cabinet boxes you already have, not a kitchen torn down to studs. This city sits among the Chain of Lakes, and it gets the same humid subtropical air as the rest of Polk County. That moisture is exactly what makes old doors warp and veneer lift at the corners. Refacing keeps the solid box in place and replaces what you actually touch: the faces, the finish, the hardware. No six-week remodel required.
Most of the homes we work on around Winter Haven and the wider Lakeland-Winter Haven metro are older, established builds. The boxes underneath dated doors are usually still square and sturdy. That's good news. It means refacing, not replacement, is often the right call, with a fraction of the disruption.

What we do
Cabinet Refacing services
Cabinet Refacing across Winter Haven and the surrounding area.
Residential Services

Cabinet Refacing
Cabinet Refacing with new doors, veneer, and hardware over your existing boxes. Free estimates, Winter Haven.
Learn more →
Kitchen Cabinet Refacing
New doors, veneer boxes, and hardware over your existing kitchen layout. Free estimates.
Learn more →
Bathroom Vanity Refacing
Bathroom vanity refacing in Winter Haven, FL with moisture-sealed finishes. New doors, drawer fronts, and hardware. Free estimates.
Learn more →
Cabinet Door Replacement
Cabinet door replacement in Winter Haven, FL. New doors and drawer fronts matched to your existing boxes. Free estimates.
Learn more →
Cabinet Refinishing & Painting
Cabinet refinishing and painting in Winter Haven, FL. Low-sand prep, durable enamel and stain finishes. Free estimates.
Learn more →
Custom Cabinet Doors
Custom cabinet doors in Winter Haven, FL built to fit odd or older openings, with shaker, raised panel, and flat panel options. Free estimates.
Learn more →
Kitchen Island Refacing
Kitchen island refacing in Winter Haven, FL matches your island to refaced cabinetry with new panels, doors, and hardware. Free estimates.
Learn more →
Thermofoil & Laminate Peeling Repair
Fix bubbling, lifting thermofoil and laminate cabinet surfaces before they spread. Free estimates, moisture-rated materials.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Winter Haven Cabinet Refacing
We check the box before we quote
Every estimate starts with us actually opening your cabinets, not guessing from a photo.
Doors matched to what's already there
New doors and veneer are built to match your existing box style, so corners and seams line up clean.
Materials picked for Florida humidity
We skip finishes known to bubble or lift in a humid Polk County kitchen.
Scheduling built around your week
Written estimates, clear timelines, and install days that don't leave your kitchen unusable.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist walks through your kitchen, checks the cabinet boxes, and talks through what look you're going for.
Step 2Measurement & Design
We measure every opening so new doors, finishes, and layout tweaks fit without surprises.
Step 3Material Selection
You pick from veneer samples, finish swatches, and hardware options before anything gets ordered.
Step 4Surface Preparation
Boxes get cleaned, sanded, and any loose joints tightened so new material has a solid surface to bond to.
Step 5Refacing Installation
New veneer, doors, and panels go on and get fitted tight to your existing cabinet frames.
Step 6Final Walkthrough
We check every door, hinge, and seam before calling the job done.
Ready to start?
Get a Free EstimateCost
Cabinet Refacing Winter Haven FL cost
A few things move the price here: kitchen size, door style, how much box repair is needed, and extras like soft-close hinges or crown molding. Call (863) 656-3842 for a free estimate once you've got a ballpark in mind.
| Project type | Typical range | What’s included |
|---|---|---|
| Hardware-only upgrades | $300–$1,200 | hinge and pull swaps on existing doors. |
| Door replacement only | $1,800–$5,000 | new fronts without touching the box veneer. |
| Full kitchen refacing | $4,000–$12,000 | new veneer, doors, and hardware across the whole kitchen. |
| Vanity refacing | $900–$2,800 | doors, drawer fronts, and moisture-sealed finish. |
| Add-ons | $200–$900 | crown molding or soft-close upgrades bundled with any job above. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials that hold up to Florida humidity

Wood Veneer Sheets
Thin wood veneers are applied over existing boxes for a refreshed natural look.

Laminate Finishes
Durable laminate options provide a cost-effective and easy-to-clean surface choice.

Solid Wood Doors
New solid wood doors replace old fronts for improved durability and appearance.

Cabinet Hardware
Knobs, pulls, and hinges are selected to match the updated cabinet style.

Soft-Close Hinges
Upgraded hinges provide quiet, smooth closing for all cabinet doors.

Protective Topcoat
A clear sealant layer protects finished surfaces from moisture and daily wear.
Questions on materials?
Get a Free EstimateTimeline
How long does cabinet refacing take?
A typical refacing project moves faster than most homeowners expect, since the boxes stay put and we're not tearing out drywall or plumbing.
- 01
Consult and measure
same day - 02
Door and finish selection
a few days - 03
Fabrication lead time
1–2 weeks - 04
On-site install
1–3 days
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance
Refacing is cosmetic work, so permitting usually doesn't come into play. That changes if electrical or plumbing gets touched alongside the job. Always confirm specifics with Polk County or the City of Winter Haven building department before work starts.
| Typically needs a permit | Often no permit |
|---|---|
| Adding new under-cabinet electrical wiring | Door and drawer front replacement |
| Relocating a sink or plumbing line during a vanity refacing job | Veneer or laminate resurfacing on existing boxes |
| — | Hardware upgrades including soft-close hinges |
| — | Crown molding addition |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a Cabinet Refacing pro
| DIY | Hire a pro |
|---|---|
| Swapping knobs, pulls, and hinges on doors that already fit well | Veneer bonding, where adhesion failures show up fast in Florida humidity |
| Simple paint touch-ups on small, low-moisture surfaces | Door alignment across a full kitchen, which gets tricky with uneven box corners |
| — | Matching finish color and sheen across multiple cabinet runs |
Not sure DIY vs pro?
Get a Free EstimateWhere we work
Serving Winter Haven and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Jan Phyl Village · Waverly · Lake Hamilton · Dundee · Lake Alfred · Auburndale · Haines City · Lake Wales · Alturas · and others
Outside these locations?
Before & after
See the work up close

Before 
After
Customer feedback
What local customers say

William A.
3 weeks ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the cabinet refacing turned out better than I pictured.
Winter Haven, FL
Jason C.
6 days ago
5 out of 5 starsCalled Winter Haven Cabinet Refacing after a neighbor tip in Winter Haven. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our crown molding addition.
Cypresswood, FL

Linda P.
1 week ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for cabinet painting. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Eloise, FL
Common questions
Cabinet Refacing FAQs
What are the steps involved in cabinet refacing?
We assess your boxes, help you pick doors and finish, prep the surfaces, apply new veneer, hang new doors and drawer fronts, then do a final check for alignment and hardware function.
How can I update my old kitchen cabinets without replacing them?
If your boxes are square and solid, refacing swaps the doors, drawer fronts, and exposed surfaces for new ones. The layout stays put, the look changes completely.
Can laminate cabinets be refaced?
Yes, as long as the laminate is bonded well underneath. We strip failed sections, reface with new material, and check adhesion before moving on.
How much does Cabinet Refacing cost in Winter Haven?
Most full-kitchen refacing jobs land between $4,000 and $12,000 depending on door style, box count, and material tier. We'll give you a written range after a quick look at your kitchen.
How long does Cabinet Refacing take?
A typical kitchen runs one to two weeks from consult to final install, with the on-site work itself usually wrapped in one to three days.
Do I need a permit for Cabinet Refacing?
Cosmetic refacing is usually permit-free. If we're adding under-cabinet lighting or touching plumbing, that part may need a permit, and we'll flag it before work starts.
Is DIY Cabinet Refacing a good idea?
Hardware swaps and simple paint jobs are fine for a confident DIYer. Veneer bonding and door alignment are where kits usually fail, especially in Florida's humidity.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Winter Haven.
